Fuel mixture for 66cc motorised bike.

TheYoungPetrolHead

New Member
Local time
8:05 PM
Joined
Jan 20, 2020
Messages
1
I got the bike 2 days ago and I have just finished one tank of 16:1 with Penrite full synthetic high quality 2 stroke oil. I was wondering due to others saying 24:1 is the go for the break in period. Is this correct? What ratio should I use, it runs crappy at lower rpm’s but that’s what two strokes right do right? also after riding for 30mins it drips oil out of the exhaust when cooling down.
 

Attachments

  • 36527888-14A0-4DB0-9682-2AE60EA06197.jpeg
    36527888-14A0-4DB0-9682-2AE60EA06197.jpeg
    194 KB · Views: 93
  • CF6CFEC1-C857-4CEE-9F0B-935F1B2BC885.jpeg
    CF6CFEC1-C857-4CEE-9F0B-935F1B2BC885.jpeg
    213.7 KB · Views: 90
Last edited:
I got the bike 2 days ago and I have just finished one tank of 16:1 with Penrite full synthetic high quality 2 stroke oil. I was wondering due to others saying 24:1 is the go for the break in period. Is this correct? What ratio should I use, it runs crappy at lower rpm’s but that’s what two strokes right do right? also after riding for 30mins it drips oil out of the exhaust when cooling down.
i ran 32:1 for my break in, then just left it at that.

the dripping in the exhaust is perfectly normal, its just burned oil traped in the exhaust.
 
32:1 break in. With synthetic. Then I go 40:1 after that. The oil dripping from your exhaust is because it's way to much oil at 16:1
 
Less oil is good but it will be richer fuel mixture at the main jet. You'll probably need a smaller main jet. and play with the needle clip
 
Back
Top