Great deal on kit???

Out of the ten or so I've gone through, there has only been a couple that didn't have a bent stud or two.
 
Here’s some pictures of engine before I take it apart.Some of then are close the same pics
 

Attachments

  • 803670BD-B111-4B02-84E5-C9B5F18A52E5.jpeg
    803670BD-B111-4B02-84E5-C9B5F18A52E5.jpeg
    94.8 KB · Views: 124
  • F611A075-34C7-4316-8DFC-2DFA4DEC19FE.jpeg
    F611A075-34C7-4316-8DFC-2DFA4DEC19FE.jpeg
    139.4 KB · Views: 111
  • AE3CA396-4BB0-488D-85FF-8F0F3D6FF03C.jpeg
    AE3CA396-4BB0-488D-85FF-8F0F3D6FF03C.jpeg
    144.7 KB · Views: 88
  • 9879FEBD-CC79-4C21-A96E-45E4B50863C7.jpeg
    9879FEBD-CC79-4C21-A96E-45E4B50863C7.jpeg
    148.2 KB · Views: 92
  • 03A45536-94A3-4B6A-81A5-460016C08E92.jpeg
    03A45536-94A3-4B6A-81A5-460016C08E92.jpeg
    113.5 KB · Views: 93
  • 7BDB7E66-0EE7-40D8-BAB5-B47FF785B963.jpeg
    7BDB7E66-0EE7-40D8-BAB5-B47FF785B963.jpeg
    109.6 KB · Views: 99
  • DFFDE5EA-21D5-43E8-AEAF-FE746418F69D.jpeg
    DFFDE5EA-21D5-43E8-AEAF-FE746418F69D.jpeg
    126.4 KB · Views: 85
  • 6DF95B51-5DFA-4A37-AFAA-7F08BC525F5B.jpeg
    6DF95B51-5DFA-4A37-AFAA-7F08BC525F5B.jpeg
    118.1 KB · Views: 94
  • 7ADDB8B3-507E-46FC-B7DA-80E7EA90E63C.jpeg
    7ADDB8B3-507E-46FC-B7DA-80E7EA90E63C.jpeg
    128.4 KB · Views: 85
  • C6C0CA67-0DF1-4E5C-AA8D-F21D39B59578.jpeg
    C6C0CA67-0DF1-4E5C-AA8D-F21D39B59578.jpeg
    118.3 KB · Views: 106
  • 0C6FADE9-0927-4FA9-AF95-49AC2C5C47B2.jpeg
    0C6FADE9-0927-4FA9-AF95-49AC2C5C47B2.jpeg
    134.9 KB · Views: 112
  • F2E3859C-BCC9-47EF-8281-6A1D7A3F0CFC.jpeg
    F2E3859C-BCC9-47EF-8281-6A1D7A3F0CFC.jpeg
    141.5 KB · Views: 85
Here’s some pictures of engine before I take it apart.Some of then are close the same pics
The picture on the clutch side don’t know If you can see the head and head gasket is kind a gap there I will investigate when take it apart.
 
More pictures everything looked pretty I’m happy see if you spot something I didn’t. Pulled head stud out . I’m surprised they all looked pretty straight locked tite them back in and going to let them sit for awhile. I got to get some new nuts in the morning. Okay intake port look good to exhaust look very good too.
 

Attachments

  • D9934435-2D5B-460C-AB84-F85BBEE8D07D.jpeg
    D9934435-2D5B-460C-AB84-F85BBEE8D07D.jpeg
    100.8 KB · Views: 96
  • F3C6DB95-CDC3-449E-95D0-A9013C6133D0.jpeg
    F3C6DB95-CDC3-449E-95D0-A9013C6133D0.jpeg
    159 KB · Views: 79
  • 5222034F-46B2-4D9B-854F-74DF1AE6ADD1.jpeg
    5222034F-46B2-4D9B-854F-74DF1AE6ADD1.jpeg
    157.4 KB · Views: 82
  • 79319D48-9A06-46FA-A3CF-C01CC318267B.jpeg
    79319D48-9A06-46FA-A3CF-C01CC318267B.jpeg
    123.5 KB · Views: 77
  • 03C953C0-B2BE-443C-B006-141D7C769B5D.jpeg
    03C953C0-B2BE-443C-B006-141D7C769B5D.jpeg
    126.4 KB · Views: 79
  • 62B588C1-5931-44A4-ADB9-C64F622C3233.jpeg
    62B588C1-5931-44A4-ADB9-C64F622C3233.jpeg
    140.5 KB · Views: 83
  • 8A3A312A-DD2D-4B1C-94F2-632FEAC2744E.jpeg
    8A3A312A-DD2D-4B1C-94F2-632FEAC2744E.jpeg
    124.1 KB · Views: 84
Never really noticed it during my view of your first set of pictures, but did today. You want to match your exhaust gasket to the port, instead of having it close off some. If you can, use your existing gasket for the outside shape and cut a new gasket with a bigger port hole in it.
 
Back
Top