GXH50 Torque Specs on Huasheng 142f?


HuaSheng 4-Cycle 49cc Motor Specs:


  1. No load RPM: 8500 Cooling: Forced Air
  2. Displacement bore & stroke: 41.8 x 35.8
  3. Power: 1.2KW @6800 rpm
  4. Torque: 2.0Nm @4500 rpm
  5. Engine net weight: 5.2 kg
  6. Length x width x height: 247 mm x 225 mm x 335 mm
  7. PTO shaft rotation: CCW centrifugal clutch
  8. Crankcase oil change: 50 hours after change, first at 10 hours operation
  9. Rear mount engine has closed loop fuel system. V-Frame mount does not
 
HuaSheng 4-Cycle 49cc Motor Specs:

  1. No load RPM: 8500 Cooling: Forced Air
  2. Displacement bore & stroke: 41.8 x 35.8
  3. Power: 1.2KW @6800 rpm
  4. Torque: 2.0Nm @4500 rpm
  5. Engine net weight: 5.2 kg
  6. Length x width x height: 247 mm x 225 mm x 335 mm
  7. PTO shaft rotation: CCW centrifugal clutch
  8. Crankcase oil change: 50 hours after change, first at 10 hours operation
  9. Rear mount engine has closed loop fuel system. V-Frame mount does not
1.2 kw ~ 1.6 hp at 6800 rpm

2 NM ~ 1.5 ft/lbs at 4500 rpm.


When using the engines at higher rpm for long periods it best to do an oil change and valve check every 25 hours of use.

The Honda GXH 50 is:

2 ft/lbs at 4500 rpm

2.1 hp at 7000 rpm.

No load of 8000 rpm

 
HuaSheng 4-Cycle 49cc Motor Specs:

  1. No load RPM: 8500 Cooling: Forced Air
  2. Displacement bore & stroke: 41.8 x 35.8
  3. Power: 1.2KW @6800 rpm
  4. Torque: 2.0Nm @4500 rpm
  5. Engine net weight: 5.2 kg
  6. Length x width x height: 247 mm x 225 mm x 335 mm
  7. PTO shaft rotation: CCW centrifugal clutch
  8. Crankcase oil change: 50 hours after change, first at 10 hours operation
  9. Rear mount engine has closed loop fuel system. V-Frame mount does not
I
You got me wrong guys i mean bolt torque. Can i use GXH 50 workshop manual? :D
 
Back
Top