Hello Needing Help

[Frankenstein]

i just took the top cover off the one with the 4 botls on top are those the torque bolts the 4 that keep the cover on over the head gasket? oh and the exhaust bolts are tight as can be and i havnt head in oil leaks over the head since i cleaned it and what oz of oil do i use for craftsman oil 3.2 or 4

4 is fine, how old is this bike?

 

[gary55]

Not as old as potatoes.

 

[Shannon]

Lmao older then a fine wine actually I don't really know I'll try to find out

 

[Shannon]

OK I did compression test it came out to 60 psi

 

[crassius]

that's way too low if you did it right

 

[Shannon]

Idk if I did right what psi am I looking for I got a torque wrech what setting do I need it on

 

[crassius]

with cold motor and throttle held open, you should be able to get it up to 110 or more - 6mm studs go to 6 to 8 pounds, 8mm studs go to 10 to 12 pounds

 

[Shannon]

oh the guy that showed me how to do it didn't say to hold throttle open i was pushing against the clutch at a steady sped to get the 60 psi and it hit 60 psi easy with no issues

 

[Shannon]

ok so i been looking around no one gives a clear enough answer for me to understand is the 4 bolts where the head it on the outside of motor the studs?

 

[Shannon]

im looking at 14mm bolts for torque