Discussion in 'Introduce Yourself' started by flash3910, Dec 8, 2007.

Tags: Add Tags
  1. flash3910

    flash3910 Guest

    Hello, new to this forum. Got a ebay kit and going to modify it. Hopefully something cool will come out of it. Hobby tig welder fabricator w/ motocross backround.

  2. mickey

    mickey Guest

  3. azbill

    azbill Active Member

    welcome to MBc ! :D
  4. wavygravy

    wavygravy Guest

    right on flash!! welcome to the forum!
  5. dbigkahunna

    dbigkahunna Guest

    Welcome to MBC from the Giant Side of Texas!
  6. Abeagle

    Abeagle Guest

    Welcome to MBc.
  7. locoWelder

    locoWelder Guest

    Welcome to MBc !
  8. Alaskavan

    Alaskavan Guest

    Welcome to MBc.
  9. flash3910

    flash3910 Guest


    Had the cylinder off of it last night, cleaned up some of the ports. I also noticed that the sparkplug looked like it really wasnt deep enough into the cylinder? So i turned down the sparkplug mounting surface, now the spark should be in the center of the fuel. This was a trick on some mid 90's hondas. Also this motor has not been run much but it apears that the chrome is wearing thin. Has anyone had a cylinder replated?
  10. Bertsimon

    Bertsimon Guest

  11. drimpact

    drimpact Member

    Welcome to MBc