Help bogs low speed and won't idle

[Juggernaut225]

Brand new zeda 80 with port work done from BMW cnc "high compression" head from Amazon
F2 thrust exhaust
Ngk plug boot and wire it's the 8 plug
Cnc chain tensioner with sprocket
36 tooth cnc sprocket and adaptor

Ok runs like total crap at low revs and dies immediately if it let off the throttle and engage the clutch please help

 

[HumanPerson]

Re-Jet?

 

[HumanPerson]

NGK6 and 7 are good for colder weather, to me it seems.

What is your plug gaped at?

I gap at around 0.028

 

[Juggernaut225]

I thought the jet was for top end and needle was for idle low end

 

[Juggernaut225]

I didn't have a gapping tool and Walmart was out when I went Soo what ever it was gapped with outta the box kinda hoping mat may have happed it before he mailed it

 

[wan37]

Pictures of engine on bike would help us all. So it sound like idle set to low. Another choke on.

 

[HumanPerson]

I thought the jet was for top end and needle was for idle low end

You have the NT carb then?

I've never used that carb lol
Sorry i can't help ya with that carb buddy.

 

[HumanPerson]

I didn't have a gapping tool and Walmart was out when I went Soo what ever it was gapped with outta the box kinda hoping mat may have happed it before he mailed it

fold a matchbook cover and you'll be in the plugs gap range for our bikes.

 

[Juggernaut225]

And I know the wire is dangling I just got it running today I'm going to solder and heat shrink I just need to get some wire

 

[HumanPerson]

Might need to adjust the float prongs?