Help bogs low speed and won't idle

Well human you were oh so right it was super rich and choking itself out at idle I have changed to a 65 and it's still 4 stroking a lil at low throttle about the first 1/4 but I don't have any smaller jet pin is set to the leanest setting...I'm thinking a 63 should be the sweet spot....I live in Louisiana at 85ft above sea level and it's always hot

Side not my halflink exploded on my first decent ride I've had on it #facepalm
 
Well human you were oh so right it was super rich and choking itself out at idle I have changed to a 65 and it's still 4 stroking a lil at low throttle about the first 1/4 but I don't have any smaller jet pin is set to the leanest setting...I'm thinking a 63 should be the sweet spot....I live in Louisiana at 85ft above sea level and it's always hot

Side not my halflink exploded on my first decent ride I've had on it #facepalm
My Wife has family in Metairie.
When we were down ther last year i helped her sisters kid build a bike, we used the #62 jet if i remember correctly.
 
tenor.gif
 
Well here she is after my half link exploded I had to use the stock tensioner not my sexy motor mounted 10 tooth
 

Attachments

  • 20200309_063820.jpg
    20200309_063820.jpg
    199.7 KB · Views: 122
I know this may sound a little stupid but are you running any oil in your gas? And what mix?

Also make sure the carb is fully on and there are no vacuum leaks, if not try adjusting the air/fuel mixture.
 
Back
Top