HELP! How do I

Tobyann

New Member
Local time
3:41 PM
Joined
Apr 25, 2023
Messages
2
Location
West virginia
I have this mini chopper and I bought this engine. I had to take the wiring harness off because there were a couple wires, missing where my husband had used it for the other mini chopper that we have. My question is I know I don’t have to have it all wired up to run it with all the lights bells and whistles so my question is how in the heck do I wire this motor or do I even have to. I look yes I’m a woman. This is my first time my husband passed away in 2021 and I’m just trying to get the second bike running. I got the first bike running low. I would like to have the second bike running. I would like to just get it running and then purchase the wiring harness later when I have the funding H E L P there is a black wire in the red wire up where the spark plug is and then a big white wire coming from where you pull started it where the heck do I put theses wires ? There is a Killswitch, which I was going to wire it to but how do I do that?
 

Attachments

  • 8B065E86-885F-4FB9-9665-0853A9A06060.jpeg
    8B065E86-885F-4FB9-9665-0853A9A06060.jpeg
    282.4 KB · Views: 89
  • 8AD12D9A-CF64-4E01-85B3-4F0C4A5A73A2.jpeg
    8AD12D9A-CF64-4E01-85B3-4F0C4A5A73A2.jpeg
    468.8 KB · Views: 89
Just match the red and black wire from the engine to the kill switch. I don't think that engine has a charging system to power the lights though.
 
Sorry for your loss.

A kill switch is simply an On/Off switch that grounds out the ignition coil. It generally doesn't matter which wire goes where on the switch terminals.

Post more pictures of the bike. There's several regular contributors who can help you get your bike back functional.
 
Back
Top