Cosmonaut
New Member
- Local time
- 10:59 PM
- Joined
- Jun 9, 2021
- Messages
- 9
Hi folks,
I found a Schwinn Stingray stealth for sale and excitedly picked it up. It ran great my first time out, went about 5-7 miles with no problems.
I then laid the bike on its side while turning on some gravel and this has resulted in my chain coming off and breaking.
I’ve got a new 415 chain on nice and secure and I went to put the clutch cover plate back on and noticed I had lost this little metal rod that goes inside the front small sprocket. This part fell out somewhere and is preventing the clutch from functioning.
Ive purchased this set to get that one little clutch pin and I’m hoping someone here can confirm this is the correct part -
3 hole clutch cover set
Any advice would be appreciated
I found a Schwinn Stingray stealth for sale and excitedly picked it up. It ran great my first time out, went about 5-7 miles with no problems.
I then laid the bike on its side while turning on some gravel and this has resulted in my chain coming off and breaking.
I’ve got a new 415 chain on nice and secure and I went to put the clutch cover plate back on and noticed I had lost this little metal rod that goes inside the front small sprocket. This part fell out somewhere and is preventing the clutch from functioning.
Ive purchased this set to get that one little clutch pin and I’m hoping someone here can confirm this is the correct part -
3 hole clutch cover set
Any advice would be appreciated
Links to eBay may include affiliate code. If you click on an eBay link and make a purchase, this forum may earn a small commission.