Watcher05
Member
HELP! :-/
I have purchased a Chinese 48cc motor. Have fitted motor but getting NO spark. I can hold the plug and sometimes get a mild pulse/current but nothing to boot me off the bike.
Have tested magneto: 363 ohms
Have tested CDI unite black wire to plug lead/cap: 2.3 (testing at 200k).
I've even held the blue and black wire coming out of motor/magneto and only a light pulsing.
Any ideas before I start replacing parts etc. I'm assuming that to get a spark, it only takes a bit of speed on the bike to produce something (pedaling around the back yard while clutch is engaged).
Thanks heaps.
I have purchased a Chinese 48cc motor. Have fitted motor but getting NO spark. I can hold the plug and sometimes get a mild pulse/current but nothing to boot me off the bike.
Have tested magneto: 363 ohms
Have tested CDI unite black wire to plug lead/cap: 2.3 (testing at 200k).
I've even held the blue and black wire coming out of motor/magneto and only a light pulsing.
Any ideas before I start replacing parts etc. I'm assuming that to get a spark, it only takes a bit of speed on the bike to produce something (pedaling around the back yard while clutch is engaged).
Thanks heaps.
Last edited by a moderator: