High Idle

Discussion in 'General Questions' started by Rockjaw, Jun 12, 2014.

  1. Rockjaw

    Rockjaw Member

    Ok im still learning..

    i have 2 bikes ..i pulled the carb off the one thats running (just to see if my other bike was a carb problem )..I put it back on the same bike ...now the bike is idling high...i dont get it..I adjusted the idle screw ..its not the idle screw..engine is reving up like mad. I guess its the throttle cable...how is that adjusted?

  2. BigBlue

    BigBlue Active Member

    Check to make sure you have the throttle cable installed correctly and check for vacuum leaks. Sometimes the slides aren't seated properly.

    AKA: BigBlue
  3. butre

    butre Well-Known Member

    it's most likely a vacuum leak