How do i make use of a brushless motor?

[Wtg78]

I have a brushless motor and want to make a e bike how do i even start or know where to..i want to make it as fast as possible and get its full potential. I do have a 24 v battery pack that came put of another e bike. And a controller from an old scooter notnsure ifnthose will help or to gwt what i need id have to get sometginf else. And where do i get that something but not destroy it fast in the process.

 

[cloakedvillain]

Whats the Kv rating of the motor? Hall sensors or just the 3 phase wires? and max phase amps of both the controller and motor?

 

[Mike Cyanide]

I have a brushless motor and want to make a e bike how do i even start or know where to..i want to make it as fast as possible and get its full potential. I do have a 24 v battery pack that came put of another e bike. And a controller from an old scooter notnsure ifnthose will help or to gwt what i need id have to get sometginf else. And where do i get that something but not destroy it fast in the process.

You have ALOT of homework to do on this one... there are no simple answer here. I would start by identifying the components you have and there output and usage. Along with the other specifications from said ie wire Guages,wiring harness diagrams... that's not to say there's any assured comparablity between the parts you have with some serious modifications or parts required.

 

[Wtg78]

Whats the Kv rating of the motor? Hall sensors or just the 3 phase wires? and max phase amps of both the controller and motor?

Oh snap someone actually knows thier electric too..ok..umm..i couldnt tell you i can show you tho

 

[Wtg78]

And this is what im working with

 

[Wtg78]

You have ALOT of homework to do on this one... there are no simple answer here. I would start by identifying the components you have and there output and usage. Along with the other specifications from said ie wire Guages,wiring harness diagrams... that's not to say there's any assured comparablity between the parts you have with some serious modifications or parts required.

Ik i have 3 motors 2 controlers a electric hud trigger accelerator, and random wired im not sure where or what goes with. And tbh...anything is going to be some sort of learning curve for sure inhavnt even leqrnwd 2 cycles all the way and now im adhding into the electric world of motors..its gonna be a good day when i can just sit and enjoy doing this sort of thing but for now were in a hurry to get me on a bike and mobile for the nice elderly client i take care of cause that my priority and my life atm.so if you or anyone can gelp me fast forward ths crap to "poof" i have a bike i would appreciate it.ty and have a blessed day all..

 

[cloakedvillain]

Pictures of motor name plates(Volts, amps, rpm, all that) and good pictures of each individual item will go a long way.

From what I saw you have brushed motors. Brushless motors will typically have 3 to 6 wires. 3 for the coils, 3 for the sensors to pulse the coils in the correct pattern.

That silver motor with the feet will be the easiest. Should have a rpm rating on it but I'm pretty sure those run around 2k rpm. Easy to check with a cheap tool what KV rating that brushed motor is.

 

[Wtg78]

Pictures of motor name plates(Volts, amps, rpm, all that) and good pictures of each individual item will go a long way.

From what I saw you have brushed motors. Brushless motors will typically have 3 to 6 wires. 3 for the coils, 3 for the sensors to pulse the coils in the correct pattern.

That silver motor with the feet will be the easiest. Should have a rpm rating on it but I'm pretty sure those run around 2k rpm. Easy to check with a cheap tool what KV rating that brushed motor is.

I will definitely donwhat i can when i get home from work. None of the motors have any thing on them thats why i just took a picture the controller prolly does ...but ill at least individualize the pictures