Huasheng 142f - Lost Spark plug thread

grummy

Member
Local time
8:11 PM
Joined
Aug 3, 2008
Messages
31
Location
Sydney, NSW Australia
This happened when I decide to change the stock spark plug with NGK CR7 HSA, too much turn ..duh ...

Is there any way to make the engine works again? Because since the "accident" I couldn't make the spark plug tight enough on the machine head - no compression.


Txs
 
Go to an engineering shop and ask them to put a helicoil insert into the head
 
FYI,the CR5 is the direct replacement. The 7 works but I believe that's a hotter plug.
I found my CR5's at my local Harley Shop. Any motorcycle shops should have one out there.
 
Unwanted Stripper!

Hey, Amigo, Jemma is correct. Your head should be able to be heli-coiled.

This process is simple, and can be done at home, BUT you must buy the little set which is, Correct sized drill-bit, correct tap, and the little coils (they look like springs).

NOW though, you must drill the hole accurately, and also not screw up during either the threading, insertion, and locking steps.

Mike
 
Back
Top