Huasheng 142f problems

Dom49cc

New Member
Joined
Aug 11, 2016
Messages
3
Likes
0
#1
I have a a brand new huasheng 142f and it's completely stock besides the gas tank. I had to remove the stock one because it was rusty on the inside which clogged the carburetor. I replaced the tank with a pit bike tank. I cleaned the carburetor with carb cleaner and put it back on. After that I tested the bike and it started. I got on and started twisting the throttle. It pulled but it felt like I was only going less than 10mph. If I went full throttle it wouldn't go any faster and it would die. But I would be able to start it again. What should I do?
 


hazmat

New Member
Joined
Aug 26, 2016
Messages
26
Likes
3
#2
i would clean carb again and take out the main jet and stab all the holes clear with a needle or something
 
Thread Status: Hello , there has been no activity in this thread for more than 365 days. You can still reply to this thread but you might not get an answer. You are much better off creating a new thread to get more replies.

Top