I can't seem to get the Clutch to disengadge

Update! My Bike is up and running

Hello all,
So I took the bike back to the shop and figured out the problem. the back tire was a little bit loose and that is what created the play to allow the chain to come loose. It was a dumb newbie mistake that will not happen again. Could have been bad. Then I realized that the gas tank was leaking from where the petcock was threaded in and added some teflon tape and problem solved. Then I took my MB out for a ride and didn't come back in until after dark. I need a light that I will pick up today. I probably put about 15 miles on it that day and everything is running great! The clutch is still pretty hard to disengadge, but I am hoping that will loosen w/ time. I am hooked!!! It's been raining for the past 2 days here and I'm already going through withdrawls. I plan to post tonight with some pictures. :25:
 
Way to go.
There is a post on a simple clutch arm adjustment somewhere here.
It Works. It is a great idea. Don't know why it is not done at the factory.
There is also a real nice aftermarket one a fellow on the site makes.
Do a little searching.
Be safe.
 
Back
Top