I did a thing

[Gordy]

Well. This particular idea has been bouncing around in my head for some time now. I decided to give it a go. I am not disappointed...

 

[Gordy]

Hey @ImpulseRocket, you were saying a while back that I should see what I could do porting a Phantom 85.... Well we're about to find out!

 

[Gordy]

 

[ImpulseRocket]

Nice! Looking forward to what you end up with.

 

[Gordy]

Nice! Looking forward to what you end up with.

I'm thinking of installing one of these with a pop top piston....

42mm OYLIN Stroker Crank

Ken and I provide the balance configuration drawings to the manufacturer of the crankshaft. Note: These crankshafts are factory assembled and aligned to factory specifications.

hybridpowerbikes.com

Bring it to a 90cc stroker. And probably just the CDH LD100 cnc head. Best value for the money.

Now that I have a job I'll have the money to toss at this lol.

 

[Gordy]

Thoughts @DAMIEN1307 ?

 

[ImpulseRocket]

If you are going to use that crank you will want to wait to do any work until you have the crank installed. that extra stroke is going to alter your port numbers.

 

[DAMIEN1307]

Thoughts @DAMIEN1307 ?

Once upon a time, I used to have multiple thoughts at the same time, Now I get just one single thought one at a time and have to grab it quick before it dies of loneliness...lol...lol...lol.

The one thought that I DO have on what you are doing is to listen to Rocket and Mike Cyanide on what your trying to do with that Avenger jug and the other cylinder working parts.

 

[Gordy]

Once upon a time, I used to have multiple thoughts at the same time, Now I get just one single thought one at a time and have to grab it quick before it dies of loneliness...lol...lol...lol.

The one thought that I DO have on what you are doing is to listen to Rocket and Mike Cyanide on what your trying to do with that Avenger jug and the other cylinder working parts.

That's a phantom jug. Chopped the top at home. It's almost perfectly square +/- .1mm. A porta-band, belt sander, and patience is what I used lol

 

[DAMIEN1307]

That's a phantom jug. Chopped the top at home. It's almost perfectly square +/- .1mm. A porta-band, belt sander, and patience is what I used lol

OK, but that's not what you had said you were working with on your second posting on this thread you started...lol.

Hey @ImpulseRocket, you were saying a while back that I should see what I could do porting an Avenger 85.... Well we're about to find out!