jamesholland
New Member
Is there a rack mount set up that will run a belt using my sheeve?At least untill I find the j motors that I want.
I have a couple of Schwinn WZ 's
- Thread starter jamesholland
- Start date
dchevygod
Member
- Local time
- 2:33 PM
- Joined
- Mar 7, 2011
- Messages
- 473
Well not exactly. But anything is possible.
I made a gebe style custom mount with a toothed belt so I believe it would be easier since you have a v-belt sheave.
Heck I think I have a modified FD mount that would be a good start. It needs a u-bracket, support struts and some paint. The spindle could be modified to accept a pulley, mount it adjust the belt line and boom! You'd be ready for a motor, throttle and fuel tank.
I made a gebe style custom mount with a toothed belt so I believe it would be easier since you have a v-belt sheave.
Heck I think I have a modified FD mount that would be a good start. It needs a u-bracket, support struts and some paint. The spindle could be modified to accept a pulley, mount it adjust the belt line and boom! You'd be ready for a motor, throttle and fuel tank.
jamesholland
New Member
What is a FD mount.Send a pic?
dchevygod
Member
- Local time
- 2:33 PM
- Joined
- Mar 7, 2011
- Messages
- 473
FD is short for friction drive. I slotted the channel on mine for a belt to pass thru when installed upside down. I have an album showing 2 pics of it installed let me find it.
https://motoredbikes.com/threads/gebe-sheave-belt-fs-billet-motor-mount-build-in-progress.37571/ pics 12 and 13 are the FD mount. The toothed belt actually worked on the smooth part of the spindle with minimal slip.
https://motoredbikes.com/threads/gebe-sheave-belt-fs-billet-motor-mount-build-in-progress.37571/ pics 12 and 13 are the FD mount. The toothed belt actually worked on the smooth part of the spindle with minimal slip.
Similar threads
- Locked
