I have a problem with my 80cc 2t motorized Bicycles, the pedals are touching the motor and I can't pedal

[paxai]

I have a problem with my 80cc 2t motorized Bicycles, the pedals are touching the motor and I can't pedal, i have tried evry possible position of engine and still nothing. Do you have any kits that will help you lift up the engine in the frame? Thanks

 

[Chainlube]

You can try to reposition the engine by adding a muffler clamp to the front mount. Most kits come with a secondary plate for wide type frames, just drill new holes in it for the muffler clamp.

Amazon.ca

If you go to FLAPS they will have them in 1.5", which is good for most down tubes.

Or, wide crank set???

 

[Wrench]

Wide crank set moves the crank arms farther out

 

[Chainlube]

Wide crank set moves the crank arms farther out

I've also bent the crank on a one piece, a little heat is needed. They all clear the engine just the same as raising it up.