While I had the cover off my 48cc grubee roundhead clutch linkage, I looked closely at the little Yuan Dong metal plate that said the motor is a 48cc/2hp engine. I figured the plate might hopefully save me from excessive harrasment someday. Unfortuately the important info is only painted on. I decided to make a more durable, official looking tag as replacement. I have an embossing press which makes tags used on foundry patterns. The raised letter are pressed into an aluminium strip. The one I made for my motor is 1/2 inch wide by three inches long. The ends are curved and punched with a hole where the plate can be riveted on. Double stick andhesive such as car emblems are mounted with or epoxy could also be used. If it is okay with Tom, Augidog and forum policy, I will make these available to forum members for a small fee to cover materials cost and mailing. Since I wouldn't know what size engine you actually have, I'll have to make them all say 48cc hehehehehehe!
Frontside
backside
Frontside
backside
