I think I have a clutch issue

Dom17463

New Member
Joined
Apr 20, 2019
Messages
6
So I’m fairly new to motorized bikes and I’m building my first one. I already took part the clutch box and experimented with it and I realized the plate was too tight. So I loosened the flower nut and the clutch plate and reinstalled the camshaft and clutch lever when I realized I might have a problem. The lever spins all the way around without anything stopping it, shouldn’t there be something to stop it? Plus the clutch plate isn’t pushing out when i turn the lever. Am I missing a part or something?
 


dparenti13

Active Member
Joined
Sep 24, 2016
Messages
125
I know that the bar is there but I didn’t even know there was a ball I’ll have to check tomorrow when I work on it
I think if the ball isn't there the spacing is too far, and the camshaft or whatever you called it just pushes the bucking bar into nothing.
 

Dom17463

New Member
Joined
Apr 20, 2019
Messages
6
I think if the ball isn't there the spacing is too far, and the camshaft or whatever you called it just pushes the bucking bar into nothing.
Yes that’s exactly what’s happening I’m definitely missing the ball
 
Top