Inlet manifold

Anyone got a stock intake and a caliper ? Can you measure tube size id and od. Also distance between the two bolts? Tom
Why would I need a caliper? I have it memorized.
The distance between the two bolts is either 32mm or 40mm
The OD is 19 mm and 3/4" will work.
Why do you need the ID?
 
I think my I.D is like 27? or something idk what the dio reed has
 
IIRC the opening for the inlet port on the cylinder is an oval shape, but the restriction is where the carb clamps to the spigot of the intake manifold.
 
Back
Top