Instructions have no information on wiring diagram

Emcee

Active Member
Local time
5:05 AM
Joined
Jul 12, 2022
Messages
210
So I'm wiring this thing up and it has no wiring diagram

The engine has Blue and Black coming out of it

CDI has Blue and Black

Throttle has green and a wire that is half black and white

The spade connectors are coming out of the CDI (I think it's called that).

This is what I have. Don't know if it's right. I'm not getting a spark when I put the boot on the plug and hold the clutch and run the pedal
 

Attachments

  • IMG_20220716_202114669.jpg
    IMG_20220716_202114669.jpg
    155.1 KB · Views: 111
  • IMG_20220716_202046808.jpg
    IMG_20220716_202046808.jpg
    111.5 KB · Views: 119
  • IMG_20220716_202032582.jpg
    IMG_20220716_202032582.jpg
    112.8 KB · Views: 119
So I'm wiring this thing up and it has no wiring diagram

The engine has Blue and Black coming out of it

CGI has Blue and Black

Throttle has green and a wire that is half black and white

The spade connectors are coming out of the CGI (I think it's called that)

This is what I have. Don't know if it's right. I'm not getting a spark when I put the boot on the plug and hold the clutch and run the pedal
If you hold the clutch the engine won't turn over and there won't be any spark.

Tape the plug across the top of the motor, release the clutch, and roll the bike forward as you watch the plug.
 
Back
Top