hello everyone,glad to find a forum with same interest i have. my location is Tennessee.also im new to any forum. please excuse any mistakes i make.im currently working on a belt drive 2 stroke. many yrs ago i completed a prop driven bike. works very well. now on the second bike. thanks for letting me drop in,,best wishes to all
introduction
- Thread starter Tucker
- Start date
azbill
Active Member
welcome to MBc ! 
M
mickey
Guest
Welcome Tucker. Do you still have the prop-bike?
A
Abeagle
Guest
Welcome to MBc.
Any pics of the prop bike, add them to the picture gallery
Any pics of the prop bike, add them to the picture gallery
prop bike
,, hi everyone,i do still have the prop bike,,i always called it my blowped. i have pictures and will post soon. my son and myself rode it many miles. i used a 25cc motor,, hub turned from steel and a nylon 22 inch model plane pusher prop. mounted above the rear wheel with no enclosed cage. it was slow off the start but came on strong with good pull above a few miles per hour. top speed with no wind was 25 mph. very reliable and no mechanical problems... tucker
,, hi everyone,i do still have the prop bike,,i always called it my blowped. i have pictures and will post soon. my son and myself rode it many miles. i used a 25cc motor,, hub turned from steel and a nylon 22 inch model plane pusher prop. mounted above the rear wheel with no enclosed cage. it was slow off the start but came on strong with good pull above a few miles per hour. top speed with no wind was 25 mph. very reliable and no mechanical problems... tucker
H
Hollywood
Guest
Welcome to MBc. Tucker.
S
Scottm
Guest
Welcome to MBc
drimpact
Member
Welcome to MBc
Similar threads
