Fletch
Member
It seems logical to me that if your jet needle clip is set to the leanest notch in order to run best, that your main can go one size leaner and vise versa. Is this always the case?
For example my main is an 80 and needle set to leanest position. I'm assuming a 75 (one size down) with the needle clip set closer to the middle position would be the ideal jetting for me?
For example my main is an 80 and needle set to leanest position. I'm assuming a 75 (one size down) with the needle clip set closer to the middle position would be the ideal jetting for me?
