Is there a kit available for my bike?

[Solux]

Hello, I've been looking at kits and browsing the forums. I'm not sure of my options though. My bike has 700x38 tires. Large frame with hydraulic disc brakes. I was thinking the best option would be a friction drive. But from what I see they only fit 26" wheels. Is there anything I can add to my bike? Center frame seems like it would have enough room, do I just need to eliminate the back disc brake maybe? Any suggestions would be great. Or maybe just pick up a cheap cruiser and add a front break? Thanks.

 

[GreasyChris]

You can use a 66cc/80cc 2 stroke kit and keep your rear disc brake. You'll need to get a hub adapter and sprocket and then just leave the disc as is

 

[Chainlube]

You can use a 66cc/80cc 2 stroke kit and keep your rear disc brake. You'll need to get a hub adapter and sprocket and then just leave the disc as is

Plus use this http://sickbikeparts.com/deluxe-2-stroke-hd-or-uhd-shifter-kit-ii/ You won't even need to add a rear sprocket.

 

[mark20]

This kit SHOULD work with your set up, as someone had a 29in bike and it fit (your wheels are basicly the same size)

BBR Tuning 38cc Lock-N-Load Friction Drive Bicycle Engine Kit- 4-Stroke

Our selection of friction-drive bike kits wil leave you wanting more. Great prices, huge inventory, amazing customer service. Shop our sales today!

www.bikeberry.com

 

[Bonefish]

That bike is too nice for a 66/80 cc engine kit. I would contact Staton Inc. and see if you could go friction or one of his gear/chain drives.

 

[Frogslayer]

I well set up cg with a shift kit would be soooooo sweet. I'll have one some day... maybe this winter if no body tells my wife lol.

 

[Chainlube]

I well set up cg with a shift kit would be soooooo sweet. I'll have one some day... maybe this winter if no body tells my wife lol.

It won't be me, she's not talking to me anymore.

 

[inspectorcritic]

Looks like any kit well do but your gonna halfta drop your disk brake that ain't worth a s**t anyway unless you can find an adapter you won't be able to adapt it too a rag joint you might need to order a special drive gear if you do order a a 18 hole gear there are 3 that take a 10 mm bolt that come in handy but I'm thinking mag rims not spokes that break on just tightening the rag joint you don't notice until later down the road cuz the all begin to break one after another!

 

[Wildwick]

You could ditch the rear hydraulic brake and use any 2 stroke kit I built a couple 700,s

 

[Solux]

You could ditch the rear hydraulic brake and use any 2 stroke kit I built a couple 700,s

That's good to know thanks.