jesse james motorized??

[DistantWolrld101]

Depends on what you want it to do! I personally don't like the occ frame it's too small too thin and break's too easy.The wcc/Jesse James frame has much thicker walled tubes,better rake and way better triple trees and forks without having to add alot of extra cost to a build,there is no offset needed to do the wcc frame but you have to fab your own mounting system.Jim's builds look cool af but the price has me shaking my head,I could buy a real bike for that much money,where it only cost me around $600 to build this one!

True it is much cheaper and much stronger, but there are two types of people also

People like me who have no mod skills what so ever such as welding,cutting, etc etc, just easier to buy parts that go on and work and be done
thats the OCC and pedal chopper

and people who have mod skills like, welding,cutting,etc etc, who can make a custom mounts,extend or shorten a frame,add more to the frame,etc etc you get my point, this is the WCC

so in the end it's like you said Depends on what you want it to do and depends on what you can do also

 

[Boydowski MoTo WCC]

Not sure why I couldn’t respond to your reply, it kept saying inappropriate material...

I wanted to thank you for all your advice. I’m some what at a standstill due to rear swing arm width. The areas closest to seat post and lower bar I can’t get wide enough to accommodate rear disk brake and hub adapter. I’m really not a big fan of sprocket being attached to spokes. I’m considering cutting the rear swing arm off an OCC I ran across, same bike I got rear wheel from, and welding it to my wcc. There will be some modifications needed but I work at a collision shop and all my techs are icar master welders and weld in aprons and lower rails that are on the road doing 80mph...

Silly question, have you seen anyone have the sprocket on the outside of frame or chain guide I believe the correct term may be?
Sorry for late response, we have family coming into town and been pretty busy! I will attach something photos,& lol realized I may even have to swap everything over due to exhaust facing backwards.
Also not sure if needed but I went with California Motorbikes “I believe manufactured by RunWell... wildcat pro racing engine ported with cnc head