killswitch help

as I was welding,
i recently moved my kill switch to the neck of the bike.
its a fantastic to be able to turn it off, without trying to get down below.
I want to put my choke on the handle bar too,
Just have to get around to larging things up... :)

last night I added silver chrome like tape to back forks on the bike,
as paint didn't cut-it for too long.

must take some pics in good light, will_shine ;-)
 
Or you can run your spark plug wire through your kill switch, call it your zzaapp switch!
 
To keep my promise::

I said I would post a pic, so here you go.
It was GRAUCHO that I had read that just used the blue wires only. Seems like the logical thing to do in my opinion.

simple on/off toggle - $3.19 at Autozone.
used a dremmel to cut away the back area of the switch where the small screw used to be, and it fit perfect in the slot.
In rough form right now. Throttle cable that came w/ the kit is too short for my liking- need to replace it.

Not on the road yet, but might be able to fire it up tomorrow!!

thanks for all the assistance you have been whether you know it or not.

EX - set up the clutch pulley - kudo's to Large Filipino- it works Great!
couple pic's of gratitude.

thanks,

Troy Fitz.
 

Attachments

  • 100_2099.jpg
    100_2099.jpg
    85.2 KB · Views: 189
  • 100_2089.jpg
    100_2089.jpg
    132.7 KB · Views: 173
  • 100_2085.jpg
    100_2085.jpg
    90.9 KB · Views: 168
  • 100_2084.jpg
    100_2084.jpg
    115.9 KB · Views: 175
  • 100_2098.jpg
    100_2098.jpg
    107.2 KB · Views: 171
Back
Top