Ktm 50 carby

It's not much on a tilt most other bikes are way worse so I'm gonna buy a new carby...
 
Yeah you need to check float height. If it's to low, it runs lean, to high and it floods and spits gas out the carb.

Idk what it is on your carb, it should be in the manual for it. If you don't have a paper copy, there should be a pdf file out there with the manual in it.
 
Yeah the needle valve in the bowl rides on the carb float. Looks like a little bullet in the carb, sits on the tang of the metal arm over/or hooked to the float. Usually I see 18mm to 22mm in height, your manual should tell you what to set it at.
 
Back
Top