LD90 engine kit

OogaBunga

New Member
Local time
4:34 PM
Joined
Nov 22, 2022
Messages
2
Personally I haven’t found any threads on this type of engine on Amazon it’s called an LD90 which is just a pk80 bottom end as far as I’m aware from reading (only discovered it today)
So I’m here to ask has anyone had an experience with an “LD90”
 

DAMIEN1307

Moderator
Staff member
Local time
10:34 PM
Joined
Jul 23, 2020
Messages
7,383
Location
Alamogordo, NM, USA
Personally I haven’t found any threads on this type of engine on Amazon it’s called an LD90 which is just a pk80 bottom end as far as I’m aware from reading (only discovered it today)
So I’m here to ask has anyone had an experience with an “LD90”
Here is what I found on it right here in the forums...Hope it is of help to you.

 

DAMIEN1307

Moderator
Staff member
Local time
10:34 PM
Joined
Jul 23, 2020
Messages
7,383
Location
Alamogordo, NM, USA
To the best of my knowledge, the difference difference between the LD100 vs the LD90 is the size of the cylinder bore and piston size being 48mm- 50mm size with at least the LD90 using the 66/80 bottom end...There could be other differences unique to the LD09 like the crank, etc, but wait to hear from someone that has actual epxperience with one of them.
 

OogaBunga

New Member
Local time
4:34 PM
Joined
Nov 22, 2022
Messages
2
To the best of my knowledge, the difference difference between the LD100 vs the LD90 is the size of the cylinder bore and piston size being 48mm- 50mm size with at least the LD90 using the 66/80 bottom end...There could be other differences unique to the LD09 like the crank, etc, but wait to hear from someone that has actual epxperience with one of them.
Legend mate appreciate you doing some extra research for me im probably gonna hold off on ordering it this week until I see some video footage or talked to someone who owns one
 
Top