LF's Trike powered by Titan Front Wheel Drive!

Hey guys! I've been away due to politics. I'm running for President but there's this whole loophole Born in the Philippines thing I'm trying to work out.

Anyway,saved up for Duane's new Chrome assembly. Looking good! Some noticeable improvements like extra holes on the carriage plate so moving the engine to fit any application is easily doable.
So that's going on Cronus for that's still my main ride but for grocery hauling/doggie carrying and hauling my trike fits the bill.
So I put my old carrier on my trike. It ain't done yet. Still little stuff yet to do. Then I gotta get Cronus going as well.
Till I can get up some more funds for now my Titan engine will be shared by both bikes.
Here's some pics.
Notice my torque strap. It stays put. At first I had it on the side but looking at it further I made it go more center. And look at how my engine sits!
I can't wait to ride this thing!
40 tooth sprocket from donor BMX bike. Bolted to the drum not the spokes.
I tell you,this trike is built pretty well.
Down the road I'll get some NoMoreFlat tubes on there. I know they work well on 20 inch tires.
The carriage holders needed a slight hole enlargement then it slid right up to the front axle. This is why I want to go with the solid tube up front. No having to change that front tire having to remove the carriage.
 

Attachments

  • Photo0657.jpg
    Photo0657.jpg
    97.6 KB · Views: 546
  • Photo0659.jpg
    Photo0659.jpg
    106.1 KB · Views: 423
  • Photo0660.jpg
    Photo0660.jpg
    86 KB · Views: 430
  • Photo0662.jpg
    Photo0662.jpg
    102.8 KB · Views: 431
  • Photo0663.jpg
    Photo0663.jpg
    80 KB · Views: 436
  • Photo0664.jpg
    Photo0664.jpg
    78.9 KB · Views: 410
The joining link clip on the smaller chain is right,while the joining link clip on the larger chain needs reversing(output shaft rotating clockwise) :)
 
Oh yes! The larger chain meaning the drive chain! The smaller chain is actually sized larger... Will do.

THANKS GUYS!!!

Makes sense.
 
The other two pics are Baby and Joe Joe.

Great looking fun ride you have there. I had to snikker when I saw your photo below. I couldn't tell if its Baby or Joe Joe but I think one of those buggers saw your PIN # at the ATM. Id keep an eye on them for a while.:D
 

Attachments

  • Photo0678.jpg
    Photo0678.jpg
    123.8 KB · Views: 155
I had since changed the 10 tooth to a 12 tooth by flipping the jackshaft and now a 14 tooth for better bottom end. This is more desirable for even though top speed is lowered it pulls better on the hills now.
Bought 4 turkeys today at King Soopers. Only one turkey per customer per visit so I kept coming back 4 times and I rode my buggy bike.

I tell you. The versatility of this trike it's starting to become my regular ride. But I still ride Cronus when I have nothing to haul.

But when I get that 3 speed figured in it may see more miles yet.

Here's some of today's pics. That gas station pic I gave the attendant 50 cents and it only took 45 cents!

Gas is getting cheap again!

I'm able to lock up my cage too. I have one lock to the frame then a second lock to go thru the first lock then the padlock goes right to the door tied with the cable lock.

I'll post a pic of that in the morning and of the current jackshaft mod. What's cool is that it's the same chain as the one used when I had the 12 tooth on there. I just removed some washers on the motor mounts to get the chain aligned right.
 

Attachments

  • Photo0731.jpg
    Photo0731.jpg
    134.5 KB · Views: 171
  • Photo0732.jpg
    Photo0732.jpg
    133.3 KB · Views: 160
  • Photo0733.jpg
    Photo0733.jpg
    79.3 KB · Views: 157
Baby and Joe Joe were born in my house on Valentines day almost 2 years ago.
Here's Joe Joe. That's the dog looking at you in that ATM pic.
 

Attachments

  • 100_8174 copy.jpg.jpg
    100_8174 copy.jpg.jpg
    27.9 KB · Views: 169
Back
Top