G'day all,
I've had a few accidents on a motorbicycle for some crazy reason..?
Stupid, stupid accidents
i went over a bump about 10cm high, smashed the front and rear rim
Went over a stormwater drain and somehow I got a deep gash in my arm, about the size of a 50c piece, Tearing the through the tissue and skin, No stitches yet, quit while im ahead.
Anywho, I have ridden a mates dirtbike (peewee 80) around a fair bit and have decided to buy a 125cc Quadbike.
Now back to the main topic.
This bike has a Key electric start, Ran off a 12V, now wiring up a dynamo would allow this to have a charging system, if not already having one.
Anyhow what i want to do is run a lighting system, 2 rear and front orange flashers, 2 Rear red lights and 2 front lights.
Now, what I want to know is what supplies I would need example: Flasher relays, Globes, Casing, Wiring etc.
I also wonder what kinda globe or led gives off the best light and uses a low amount.
Thanks and sorry for the long post, I will also be adding a control box for all lights and turning signals
My brother wants a setup exactly like this on motorbicyle, thanks in advance
I've had a few accidents on a motorbicycle for some crazy reason..?
Stupid, stupid accidents
i went over a bump about 10cm high, smashed the front and rear rim
Went over a stormwater drain and somehow I got a deep gash in my arm, about the size of a 50c piece, Tearing the through the tissue and skin, No stitches yet, quit while im ahead.
Anywho, I have ridden a mates dirtbike (peewee 80) around a fair bit and have decided to buy a 125cc Quadbike.
Now back to the main topic.
This bike has a Key electric start, Ran off a 12V, now wiring up a dynamo would allow this to have a charging system, if not already having one.
Anyhow what i want to do is run a lighting system, 2 rear and front orange flashers, 2 Rear red lights and 2 front lights.
Now, what I want to know is what supplies I would need example: Flasher relays, Globes, Casing, Wiring etc.
I also wonder what kinda globe or led gives off the best light and uses a low amount.
Thanks and sorry for the long post, I will also be adding a control box for all lights and turning signals
My brother wants a setup exactly like this on motorbicyle, thanks in advance