I was asked about my plug clearance in another thread so I thought I would post here as well:
I had to make a plug wrench from a cut down 1/2 drive, 15/16 six point socket with a clearance cut into it to nest down over spark plug, and a 1/2 in hole thru the welded on handle.
There was now way to use a spark plug cover, so I am using a ring terminal
I had to make a plug wrench from a cut down 1/2 drive, 15/16 six point socket with a clearance cut into it to nest down over spark plug, and a 1/2 in hole thru the welded on handle.
There was now way to use a spark plug cover, so I am using a ring terminal