Made a few purchases!!

sherron82

Active Member
Local time
1:47 AM
Joined
Nov 9, 2023
Messages
286
Location
Morristown TN
Finally saved up enough money to make a few good purchases, hopefully it will all work out in the Kent bayside. There's only a few things left to do and one more thing to buy. High performance head from SP or gomax. I checked the squish yesterday with the stock head and it wouldn't even measure the 1.2mm solder wire so may have to sand down the cylinder some. I also have 2 of those spacers from SP. I plan on getting a super OZ magneto too. Wish me luck guys!!
 

Attachments

  • Screenshot_20240429-082632.png
    Screenshot_20240429-082632.png
    176.9 KB · Views: 34
  • Screenshot_20240429-082709.png
    Screenshot_20240429-082709.png
    174 KB · Views: 24
  • Screenshot_20240429-083005.png
    Screenshot_20240429-083005.png
    277.7 KB · Views: 30
  • Screenshot_20240429-083112.png
    Screenshot_20240429-083112.png
    218.9 KB · Views: 29
Finally saved up enough money to make a few good purchases, hopefully it will all work out in the Kent bayside. There's only a few things left to do and one more thing to buy. High performance head from SP or gomax. I checked the squish yesterday with the stock head and it wouldn't even measure the 1.2mm solder wire so may have to sand down the cylinder some. I also have 2 of those spacers from SP. I plan on getting a super OZ magneto too. Wish me luck guys!!
It's always a good feeling when you start getting your bike to the way you want it.
 
Good luck!
Luck has nothing to do with it...It is called nothing more than ability and learning to achieve ones goals.

Here is an example using mine...ALL hand made and custom fitted by me...NO LUCK whatsoever, just skills and abilities is all...lol.

Rear frame to disk brake caliper adapter:

Fabricated Rear Caliper Adaptor IMG_0347.jpg


Front frame to disk brake caliper using an F-16 "Adel" clamp:

DSCN0189.JPG


And last but not least, my home made front motor mount:

IMG_0319.jpg
 
Back
Top