Mag Rim Bolts

[Sumsloppymeet]

anyone ever see a set of mags do this on you luckyily i noticed before it turned bad but some how the bolts ended up coming outta my rear motor side drive sprocket i get her home and pull the wheel to find this im just curious how this may have happened? and can i or should i even try to repair the crack in the hub it seems that has developed?

 

[Street Ryderz]

anyone ever see a set of mags do this on you luckyily i noticed before it turned bad but some how the bolts ended up coming outta my rear motor side drive sprocket i get her home and pull the wheel to find this im just curious how this may have happened? and can i or should i even try to repair the crack in the hub it seems that has developed?

The stock fasteners that came with my mags were s**t and not very long they sheared yes all 6 sheared off! I then had to extract the broken bolts retap the holes and replace the bolts with a better grade hardened ones and sunk them 30mm deep no issues since.

 

[Sumsloppymeet]

ok it actually seems like threads may still exsist in each hole it looks like ill do that tho im sure thats my issue i doubt it was torque that did it right lol

 

[Sumsloppymeet]

i was gonna slap some jb weld on the crack i see as well

 

[Street Ryderz]

ok it actually seems like threads may still exsist in each hole it looks like ill do that tho im sure thats my issue i doubt it was torque that did it right lol

I think in my case it was a combination of the torque,the bolts not being very deep and of s**tty quality.

 

[Street Ryderz]

i was gonna slap some jb weld on the crack i see as well

Being that it's only one hole messed up it should be ok but try to sink them deeper so that there is no chance of backing out.

 

[Sumsloppymeet]

yea 10.9 was quality of steel of mine but i think my problem was exaclty like yours now even the sprocket holes took some damage lol thats the one bolt that was still barely in there that i recieved i put it between two clutch cover screws from the bike berry hd screw set

 

[Sumsloppymeet]

i just measured and without drilling deeper i could fit the length of the clutch cover screw in there np \ ive got enough of the hd quality clutch cover bolts laying around aswell

 

[curtisfox]

Sprocket damage is from bolts being lose, just like a car when lug nuts come lose. Don't try to reuse, get a new one.............Curt

 

[Sumsloppymeet]

I've got Amazon returning it it was barely 34 days since I got it lol but outta common sense I grabbed my other mag rim from my black set and drilled and retapped em to 6mm and put 6 20mm long hex caps in it so that one doesn't do it too