Mini Moto Exhaust

viftamedhandera

New Member
Local time
12:45 PM
Joined
Sep 24, 2008
Messages
2
Links to eBay may include affiliate code. If you click on an eBay link and make a purchase, this forum may earn a small commission.
you need to give us engine spec.

ps that second place i have bought stufff from there they seem ok. give them a call?
 
Links to eBay may include affiliate code. If you click on an eBay link and make a purchase, this forum may earn a small commission.
Don't even think about #1. I got one for my engine and it was terrible. The stinger was clogged up with slag, the single baffle in it was completely loose, and it didn't really quiet it down any once i fixed it.

I now have the second one in Ghost0's post.

http://cgi.ebay.co.uk/Mini-Moto-EXH...photoQQcmdZViewItemQQ_trksidZp1713.m153.l1262

I haven't fired it up yet, but it actually has a glasspack silencer (with fiberglass in it!). It looks like it would be pretty easy to slip the stock silencer off, and put a new larger diameter one. Just pop the cotter pin out and put the new one on.
 
Links to eBay may include affiliate code. If you click on an eBay link and make a purchase, this forum may earn a small commission.
Yep I have that pipe too, It is definetely a good upgrade, Looks great too! compared to the normal mini moto pipes,
It is loud though, but sounds nicer than stock. But the silencer is of very basic construction, which is a good thing, because it would be pretty simple to make a more quiet one.
 
Last edited:
Don't even think about #1. I got one for my engine and it was terrible. The stinger was clogged up with slag, the single baffle in it was completely loose, and it didn't really quiet it down any once i fixed it.

I now have the second one in Ghost0's post.

http://cgi.ebay.co.uk/Mini-Moto-EXH...photoQQcmdZViewItemQQ_trksidZp1713.m153.l1262

I haven't fired it up yet, but it actually has a glasspack silencer (with fiberglass in it!). It looks like it would be pretty easy to slip the stock silencer off, and put a new larger diameter one. Just pop the cotter pin out and put the new one on.


I also have a pipe like that, and did slip the stock silencer off and made a larger one to quiet it down...........
 
Links to eBay may include affiliate code. If you click on an eBay link and make a purchase, this forum may earn a small commission.
Fastboy Here is a pic, and you have a PM. Good luck.........
 

Attachments

  • August 2008 007.jpg Resized.jpg
    August 2008 007.jpg Resized.jpg
    105.5 KB · Views: 767
Back
Top