Mock up

Discussion in 'General Questions' started by DaveA, Jul 31, 2015.

  1. DaveA

    DaveA New Member

    Just a quick post of the bike mocked up. I have a sprocket adapter (clamp to hub type) and a chain tensioner on the way. The tensioner pictured is from manic mechanic, I liked that it was a cleaner design and a few bucks cheaper then the others out there. My daughter and I plan to put it all together on August 10th....hopefully I will have some test run video posted by the 11th :) Thanks to everyone for all the great feedback!

    11796305_10207643256462158_3724260179761784405_n.jpg 11817233_10207643256342155_4850699272284733948_n.jpg Screen Shot 2015-07-31 at 3.58.00 PM.jpg

  2. V 35

    V 35 Member

    Good looking chain tensioner, looks well thought out Check sprocket index, even the two piece hubs can be off a bit

    A big pair of calipers would be the way to go. Measure from rim to sprocket hole Should be same for all three holes
  3. Vapourtrail

    Vapourtrail New Member

    the forks are on backwards
  4. Timbone

    Timbone Active Member

    Yes! I noticed that, too! Brakes can't work like that!

    Looks like negative trail! Sketchy!
  5. DaveA

    DaveA New Member

    Ha! Good catch, lucky this is a "mock up"
  6. DaveA

    DaveA New Member

    quick fix...not sure how long it would have taken me to catch that before someone said something. THANKS!