DAMIEN1307 Moderator Staff member Local time 12:59 PM Joined Jul 23, 2020 Messages 14,100 Location Alamogordo, NM, USA Mar 2, 2022 #61 Amwicr said: Oh I think the aluminium gasket might be kind of bent. that would do it, right? the one at the top end of the engine. Click to expand... And exactly how would the gasket be bent???...Have you had the motor apart???...DAMIEN
Amwicr said: Oh I think the aluminium gasket might be kind of bent. that would do it, right? the one at the top end of the engine. Click to expand... And exactly how would the gasket be bent???...Have you had the motor apart???...DAMIEN
Amwicr Well-Known Member Local time 2:59 PM Joined Feb 18, 2022 Messages 1,123 Mar 2, 2022 #62 No, except that I had to assemble it
DAMIEN1307 Moderator Staff member Local time 12:59 PM Joined Jul 23, 2020 Messages 14,100 Location Alamogordo, NM, USA Mar 2, 2022 #63 Amwicr said: No, except that I had to assemble it Click to expand... So it was bent during assembly then...I would replace it then with a copper gasket and make sure you anneal it first before putting it on.
Amwicr said: No, except that I had to assemble it Click to expand... So it was bent during assembly then...I would replace it then with a copper gasket and make sure you anneal it first before putting it on.
Amwicr Well-Known Member Local time 2:59 PM Joined Feb 18, 2022 Messages 1,123 Mar 2, 2022 #64 I ordered a copper gasket, but in the meantime I tried flipping the stock one over. I tested it, now the idle part is solved. but the bike still is pushing itself with out throttle.
I ordered a copper gasket, but in the meantime I tried flipping the stock one over. I tested it, now the idle part is solved. but the bike still is pushing itself with out throttle.
DAMIEN1307 Moderator Staff member Local time 12:59 PM Joined Jul 23, 2020 Messages 14,100 Location Alamogordo, NM, USA Mar 2, 2022 #65 Then the clutch is not backed off enough then yet. If the clutch is totally released, it will want to go...If the clutch is squeezed in and wants to go, then go back to the adjustment info you were previously given
Then the clutch is not backed off enough then yet. If the clutch is totally released, it will want to go...If the clutch is squeezed in and wants to go, then go back to the adjustment info you were previously given
Amwicr Well-Known Member Local time 2:59 PM Joined Feb 18, 2022 Messages 1,123 Mar 2, 2022 #66 Ok then it sounds like there's no problem anymore then. Thanks!