Karl Snarl Well-Known Member Local time 12:22 PM Joined Sep 20, 2019 Messages 5,959 Location Chunky Monkey Mole Hole Feb 26, 2022 #61 Seansull said: My bucking bar is to far in whiout the ball bearing and the bucking bar is totally stuck any ideas how to get it out Click to expand... Brake cleaner to get the grease out, and it will slide out of the hole when you tilt the engine.
Seansull said: My bucking bar is to far in whiout the ball bearing and the bucking bar is totally stuck any ideas how to get it out Click to expand... Brake cleaner to get the grease out, and it will slide out of the hole when you tilt the engine.
S Seansull New Member Local time 6:22 PM Joined Feb 26, 2022 Messages 25 Feb 26, 2022 #62 DAMIEN1307 said: This video might be of some informational value for you...DAMIEN Its just showing the clutch shaft on the clutch pad side of things. I wouldn't do anything that would possibly allow even one piece of metal filings to infiltrate the clutch assembly whatsoever. Click to expand... Ohhh is taht where I blow it in from
DAMIEN1307 said: This video might be of some informational value for you...DAMIEN Its just showing the clutch shaft on the clutch pad side of things. I wouldn't do anything that would possibly allow even one piece of metal filings to infiltrate the clutch assembly whatsoever. Click to expand... Ohhh is taht where I blow it in from
DAMIEN1307 Moderator Staff member Local time 11:22 AM Joined Jul 23, 2020 Messages 14,321 Location Alamogordo, NM, USA Feb 26, 2022 #63 Karl Snarl said: Brake cleaner to get the grease out, and it will slide out of the hole when you tilt the engine. Click to expand... Or assisted by a magnet.
Karl Snarl said: Brake cleaner to get the grease out, and it will slide out of the hole when you tilt the engine. Click to expand... Or assisted by a magnet.
DAMIEN1307 Moderator Staff member Local time 11:22 AM Joined Jul 23, 2020 Messages 14,321 Location Alamogordo, NM, USA Feb 26, 2022 #64 Seansull said: Ohhh is taht where I blow it in from Click to expand... No...It would be blown from the bucking bar side at an angle where the air would angle in and lift and help blow it out.
Seansull said: Ohhh is taht where I blow it in from Click to expand... No...It would be blown from the bucking bar side at an angle where the air would angle in and lift and help blow it out.
S Seansull New Member Local time 6:22 PM Joined Feb 26, 2022 Messages 25 Feb 26, 2022 #65 DAMIEN1307 said: NO...It would be blown from the bucking bar side at an angle where the air would angle in and lift and help blow it out. Click to expand... Ok thanks I’ll try that tomor
DAMIEN1307 said: NO...It would be blown from the bucking bar side at an angle where the air would angle in and lift and help blow it out. Click to expand... Ok thanks I’ll try that tomor
S Seansull New Member Local time 6:22 PM Joined Feb 26, 2022 Messages 25 Feb 26, 2022 #66 DAMIEN1307 said: Or assisted by a magnet. Click to expand... Thanks
S Seansull New Member Local time 6:22 PM Joined Feb 26, 2022 Messages 25 Feb 26, 2022 #67 DAMIEN1307 said: NO...It would be blown from the bucking bar side at an angle where the air would angle in and lift and help blow it out. Click to expand... So I blow in from the same side I wnat to get it out from how would taht work
DAMIEN1307 said: NO...It would be blown from the bucking bar side at an angle where the air would angle in and lift and help blow it out. Click to expand... So I blow in from the same side I wnat to get it out from how would taht work
S Seansull New Member Local time 6:22 PM Joined Feb 26, 2022 Messages 25 Feb 26, 2022 #68 Seansull said: So I blow in from the same side I wnat to get it out from how would taht work Click to expand... The compression of air I suppose
Seansull said: So I blow in from the same side I wnat to get it out from how would taht work Click to expand... The compression of air I suppose
DAMIEN1307 Moderator Staff member Local time 11:22 AM Joined Jul 23, 2020 Messages 14,321 Location Alamogordo, NM, USA Feb 26, 2022 #69 Seansull said: So I blow in from the same side I wnat to get it out from how would taht work Click to expand... Thats a yes...The compressed air will move it and vibrate it around to dislodge it and help pop it out.
Seansull said: So I blow in from the same side I wnat to get it out from how would taht work Click to expand... Thats a yes...The compressed air will move it and vibrate it around to dislodge it and help pop it out.
Axl Myk Well-Known Member Local time 1:22 PM Joined Jul 11, 2020 Messages 632 Feb 27, 2022 #70 USE A MAGNET.