Motorized bicycle wheel wont spin

[NandoBando]

So ive just put together a motorized bike and the rear wheel wont move at all and when i put my body weight on it, it does nothing, anyway i can fix this?

rear wheel wont move​

I just put together a motor on my bike and the rear wheel wont move at all i dont know what the issue is, it just drags.
Before I put it on it would work fine, but now it just wont work?

 

[Gordy]

Are you pulling in the clutch?

 

[NandoBando]

i am still not moving tho

 

[DAMIEN1307]

So ive just put together a motorized bike and the rear wheel wont move at all and when i put my body weight on it, it does nothing, anyway i can fix this?

rear wheel wont move​

I just put together a motor on my bike and the rear wheel wont move at all i dont know what the issue is, it just drags.
Before I put it on it would work fine, but now it just wont work?

I have zero idea of your mechanical abilities are but I can tell you that you are giving next to zero information needed in order to be able to help you out, you didn't even answer a simple question that Gordy asked you.

Are you pulling in the clutch?

All you said was, "i am still not moving tho".

Time to give details here and probably some pictures of your build on whats going on here, it is tough just guessing without knowing how you built it.

Little things like how fast are you pedaling the bike down the road before you release the clutch lever in order to start, etc.

 

[NandoBando]

ok i pulled the clutch and tried to move the pedal forward and it would not move the back tire would just drag across the ground idk if it could have been my chain the chain was getting stuck maybe because not enough tension chain would pop off. i recently removed the chain and im getting a new clutch since i messed the other one up and the oil filter also.

 

[Johnny_]

ok i pulled the clutch and tried to move the pedal forward and it would not move the back tire would just drag across the ground idk if it could have been my chain the chain was getting stuck maybe because not enough tension chain would pop off. i recently removed the chain and im getting a new clutch since i messed the other one up and the oil filter also.

That bike is way too small for the engine. The engine should sit straight on the bars. Spark plug in line with the top bar as much as possible. That is not going to work.

 

[DAMIEN1307]

You are never going to have any real success with that bicycle frame as it is not allowing enough room in the frame for an engine, moreover, it is probably an aluminum frame which WILL crack and break apart on you with a motor on it.

 

[DAMIEN1307]

i messed the other one up and the oil filter also.

I should point out to you that a 2 stroke engine doesn't have an oil filter...The oil is mixed with the gasoline.

 

[NandoBando]

what frame should i look into getting

 

[Johnny_]

what frame should i look into getting

Where do you live?