Multi Question

[RvdKiller]

What I Have
Engine: 80cc Flying Horse Bicycle Engine Kit/BBR Silver
Carb: Nt Stock I also have HP Clone
Plug: NGK B6HS 7534
Bike: Black Zeda Bike
Pedals: Wide Crank Assembly 9/16 Pedals
ManiFold: 80cc offset 40 mm intake
Fuel Line: 3/16" Blue Polyurethane
Everything else stock
Fuel Type: 87 Unleaded
Oil Type: 2 Stroke Marine Grade
Oil Ratio: 16:1


Question 1: Can i use car oil if so what is the best oil to use
Question 2: what is the best ratio to use on these CG/HT engines
Question 3: i have to pedal quite a bit to get the engine to start even after priming but i have seen people able to just give theirs a tiny push or even a bump and some just spin the tire and let the clutch go to start it, how can i tune mine to where it starts this easy.


Also is there anything else i should be notified about to get more power out of these 2 stroke engines.

 

[JerboaJohn]

car oil will smoke like a sumbich,,
16:1 ok first 3-4 tanks then you'll be good 24 or 32:1 as it's broke in, and you'll feel it give you better throttle response and power

 

[JerboaJohn]

when all parts are spun in and friendly to each other, it gets easier to start. as you get a feel for it, with jetting change helps power but keep an eye on anything loosening up like the head or exhaust (check each first few rides) chain stretches too at first. keep good tension,,,