My Dax70 throttle doesnt fit my handlebar?? Some help plz!

Discussion in 'General Questions' started by StrontiumEthics, Aug 4, 2008.

  1. StrontiumEthics

    StrontiumEthics Motored Bikes Sponsor

    Hey, I have a slight problem, My throttle doesnt fit my handle bar which is 25.4 cm or so. Is there anything I can do to solve this problem? It like when I put on the handlebar, and it doesnt stick down with I screw down the mounts. the throttle came with my Dax70.

  2. stringer

    stringer New Member

    Wrap electrical tape around the bars.
  3. HoughMade

    HoughMade Guest

    Don't think that will work- 25.4 mm is 1 inch. Standard handlbars are 7/8ths of an inch. The answer is "simple"- three (or four) choices- get standard size handlebars, get a motorcycle sized throttle or make some sort of thunmb throttle work. The 4th choice is use your imagination, but I think the first choice is preferable.
  4. StrontiumEthics

    StrontiumEthics Motored Bikes Sponsor

    No the throttle diameter is to big for the handlebarr, 25.4 mm is actually to small.
  5. StrontiumEthics

    StrontiumEthics Motored Bikes Sponsor

    ok so..........

    The black tape idea is pretty good, but wont it slip? You guys have any more ideas, I still have the black tape in mind though. Do you think hot glue will work? Or any more suggestions?
  6. HoughMade

    HoughMade Guest

    My bad, for some reason I though you were giving the size of your hande bars- black tape.
  7. Irish John

    Irish John Guest

    Green tape would look better!
  8. dwsutton

    dwsutton Member

    You could try Alabama Chrome - commonly called duct tape ........ :grin: