My first attempt

Karl Snarl

Well-Known Member
Joined
Sep 20, 2019
Messages
1,874
I brought my two killers out today to for a bit. We saw a few birds but they didn't come in close. They flushed one pheasant but their season doesn't open until Saturday. We still had fun though. View attachment 159306
I miss my old dogo. Four more days and it will be 5 years from the day I had to say goodbye. He was my best friend. I wish I could go back in time and just do it all again with him and my old cat. We was the three amigos.
 

Frogslayer

Well-Known Member
Joined
Jan 20, 2019
Messages
2,545
I miss my old dogo. Four more days and it will be 5 years from the day I had to say goodbye. He was my best friend. I wish I could go back in time and just do it all again with him and my old cat. We was the three amigos.
You'll always have the memories
 

Karl Snarl

Well-Known Member
Joined
Sep 20, 2019
Messages
1,874
Ok try#8 on the bed and running. Big chunky monkey is taking a nap after dinner and the little evil one is hanging out in the window looking for her boyfriend. I think shes to young for one, shes only 7 months old!!! lol. Anyway, it's running at 230 temp and 40mm/s. Down from 250 temp, and 60mm/s. Let's see how it does.
 

Frogslayer

Well-Known Member
Joined
Jan 20, 2019
Messages
2,545
I think you may be making too drastic of changes. Can you change the temp mid run? When dialing in a lot of folks will only move in 5 degree increments at a time.
 

Karl Snarl

Well-Known Member
Joined
Sep 20, 2019
Messages
1,874
It was running so hot the stack was starting to sag, last night at 250 for the temp. I had to put a fan on it and run it full blast. I figured i'd start at the bottom of the makers recommendation. No, Can't change anything while running. I use it as a stand alone. Just use prog on pc, then upload to SD card and insert. Hit the play button and 30-60 seconds later ( head heating up) it starts. I'm not sure how to get it to work when on the usb cord, yet. I'm just thrilled I got it to work. lmao. At the price I paid, I was wishful thinking, and it paid off. The manufacturer only recommends pla and tpu ( whatever that it). I guess petg is harder to work with?
 

Karl Snarl

Well-Known Member
Joined
Sep 20, 2019
Messages
1,874
16341792720242000509637.jpg
16341792933181834981505.jpg
1634179318032238103151.jpg
almost!!!! Try 8 is looking good!!!
 

Karl Snarl

Well-Known Member
Joined
Sep 20, 2019
Messages
1,874
1634185075261260834040.jpg

I have one being made and one more I left at work. So 5 maybe 6 its coming out good, useable pieces out of 9 tries isn't all that bad. Ik they look like crap, but inside a reed after sanding a bit, I really don't think anyone's going to notice.
 
Top