My first project...help

Street shark

Member
Local time
1:28 AM
Joined
May 1, 2017
Messages
59
Hello everyone, I'm new to the forum but I'm thankful I found it . I'm looking to make a motorized bike to drive to work during the summer , here is my original idea,. I have 0 experience, I was hoping y'all could let me know if u see any immediate issue I will have with installation and use.


IMG_4235.JPG

Using this bike ...

And putting this kit on it.
IMG_4243.jpg
 
Motor mounts because of the crank position?
Sprocket adapter cuz of the spoke count?
Chain tensioner?
And where can I find these?
Do u have a decent priced two stroke u can recommend?
 
Motor mounts to increase the receptivity of the frame engine installation.

Sprocket adapter because you should not torque the spokes, you should torque the hub.

Tensioner because the stock ones flip the chain once and cause a misaligned depth of travel.

Hardware because stock is aluminum. Take your kit for a trip to the hardware store, it's easy and worth the reliability.
 
Last edited:
One more thing to consider. If you haven't bought the bike yet see if they have something similar with v brakes or even better a disc brake on the front forks. Going is great, but stopping is even better. Coaster breaks are not sufficient for motorized bikes. Good lookin bike though.
 
Back
Top