sherron82
Active Member
Well so far it's going good all but the alignment issues with the rims I got. But I'm working on that issue. But here's what all I've got and did. Kent bayside 7 speed, I stripped the paint off and painted the dark cherry red. I have the cdh power 12g rims with CTS city 2.125 tires, painted some of the engine red with the high heat paint, I upgraded the G2 reed valve with bigger bolts for better seal and the reed stuffer is in it, windowed piston, squish is set at .9, had to sand down the cylinder, light port work, copper head gasket, runleader temp and rpm tach with mount bracket. Mirrors, 12,000 lumina headlight, firepower handlebar, catnip cdi, super charge OZ magneto, pro taper twist throttle, eagle one brake pads, better wrist pin bearing, 12 15 15, PZ19 carb with jet kit, CDH67 pipe, already had it fabricated. Olyn head, I think that's it lol. Just gotta figure out the damn chain alignment, that's all ive got to do left. I haven't put some of the stuff I mentioned on it yet, more worried about getting the chain lined up right now more than anything. If you look at some of the pics you can see how much the sprocket will stick out from the engine sprocket.
