Carby Mystery Carb Part

Discussion in '2-Stroke Engines' started by steelfan41, Aug 12, 2011.

  1. steelfan41

    steelfan41 Member

    OK, so curiosity got the better of me and I disassembled the new carb I have to see where the C clip was before I mounted the carb. I had the Choke and Carb parts out when I hear "ping" and I find this piece and I don't know where in the assembly it goes. Any very detailed info would be greatly appreciated.

    Attached Files:

  2. motorpsycho

    motorpsycho Active Member

    I'm pretty sure that the piece you are showing goes on top of the slide, on top of the C clip and under the slide spring.
    so it would go in order, c-clip, that part and then the spring.
    I'm pretty sure that's where it goes because it doesn;t look like anything mechanical or anything that would cause the carb not to work.
    I think it's just a little clip to help hold down the c-clip and needle with pressure from the slide spring on top of it.
  3. steelfan41

    steelfan41 Member


    TY so much, I can still hear that "ping" on the floor and I hadn't done anything to make a noise. :sweatdrop: