Clutch Need Clutch help!!

Discussion in 'Transmission / Drivetrain' started by Rnalecz, Jul 30, 2008.

  1. Rnalecz

    Rnalecz New Member

    I just installed the clutch, and im not sure if its working right, i pull it from the clutch lever and its really hard to pull it. With it pulled i tryed to spin the engine's sprocket or gear and it wont turn. How do i know if the clutch is installed right and if its adjusted right?

  2. It's the hardest part of this endeavor, but once you figure it out you'll be happy.

    It is very hard to pull, you will really build up your left forearm pulling the clutch.

    the clutch when engaged (motor on) should be straight. when disengaged (freewheeling) it should be very slightly angled towards the bike frame. We're talking like 5 degrees.