Need help diagnosing problem, with my 100cc 2 stroke bicycle engine

Memberberry801

New Member
Local time
12:15 PM
Joined
Sep 11, 2024
Messages
1
Location
Salt Lake City
Hi everyone, I have a problem, I think with my clutch, so when I squeeze my clutch lever in and pedal my bike I hear a loud clunking noise and then when I let go of my clutch it will start up and start to ride, but only for about 50ft before the engine bogs down and dies, I recently replaced the ball bearing that sits inside the clutch and I did use grease when replacing it, I’m not sure why the engine keeps dying on me or why the clutch is making the noise.
 
Hi everyone, I have a problem, I think with my clutch, so when I squeeze my clutch lever in and pedal my bike I hear a loud clunking noise and then when I let go of my clutch it will start up and start to ride, but only for about 50ft before the engine bogs down and dies, I recently replaced the ball bearing that sits inside the clutch and I did use grease when replacing it, I’m not sure why the engine keeps dying on me or why the clutch is making the noise.
Start off by using my tutorial on how to have the clutch adjusted from beginning to end, be sure to read every single detail a step at a time and lets see if the problem lies in the initial adjustments of the clutch and lever and cable systems.

 
Back
Top