Need help

D

Deadpool92

Guest
My bike was running fine but I put it away tool it out the next day bike wouldn't start. I replaced the cdi (no killswitch) replaced the spark plug. I can peddle it release clutch hear everything moving and trying to start but won't start. All bolts are tight and sealed. Does get spark. Good gas mixture. I don't know what else to do. If anyone can help please comment
 
hi an easy way of turning the engine over is to use a 14 mm socket on a drill to move the bolt on the magneto clockwize turning the engine over

if you have spark and fuel i would suspect a leak at your head i would try tightening the 4 engine bolts on top of the engine see if it helps

or try skimming your head so you know its not leaking

u do this easyly with wet n dry sand paper on a kitchin side
 
be careful if trying to drill start - seen folks ruin threads on the crank that way

if plug is dry, look at carb & intake if way too wet, may have fuel in bottom of motor
 
Back
Top