New build

Seems relatively safe lol

 

[FurryOnTheInside]

Very nice.
One and one eighth inch steerer this time? That means you can upgrade the fork with a used high quality fork when you want to.
When this fork's bushings wear out, which they will (and even sooner if you flexed the lowers a bit to wedge the disc adapter in), you can hacksaw the arch brace off it and keep it to fit a v brake on the rear of a cruiser frame etc that doesn't have one.

 

[HumanPerson]

Haven't used the micrometer on the head/steer tube yet
Didn't need to spread the forks since i modified the disc brake adapter to fit properly inside of the axle area.
I've notice a difference in the smoothness of the way it runs down the road without a chain tensioner though, seems to be quite a bit better in my opinion.
Top speed is at 37MPH and it seems to like cruising at about 30, give or take a mile two MPH.
Gets up the 35+ degree LONG hills without peddling
I believe that i have it dialed in, had to re jet today with a #65 jet, seems to have done the trick though FOTI

Thank you for you input and critique

Ride Safe!

 

[Randall]

 

[HumanPerson]

thanks

 

[Jose Gowins]

Great!!