CrispyLeaves98
Well-Known Member
I don't eat breakfast, why?
Carby New carb??
- Thread starter CrispyLeaves98
- Start date
Karl Snarl
Well-Known Member
do you eat cheezeits?
or anything in a box similar to those boxes? I'm not worried bout the food, just the box, where you will get the gasket from.
or anything in a box similar to those boxes? I'm not worried bout the food, just the box, where you will get the gasket from.
Karl Snarl
Well-Known Member
Lucky charms box works the best for making gaskets. It has to do with the leprechaun and the pot of gold, just makes them seal better than say fruitloop or frosted mini wheats box.
CrispyLeaves98
Well-Known Member
Okay I probably got one, you got a cutout, I have a yd100 with the wider intake
Karl Snarl
Well-Known Member
Trace it out on the box, cut it out, lightly sand off the film with the pictures on it. then dip in 2 stroke oil, or make a little puddle for it to soak in. Then install.
if you are taking it from a jug, borrow your sisters nail polish and cleaner, paint the hole you want to match. Then press the box paper to it for a few second. Then check it to make sure you got a good print. Then hurry up and clean off the nail polish from the jug or where ever the hole you are matching is. Then just do the above steps.
Karl Snarl
Well-Known Member
Now when your mom ask's why there is a weird hole cut out of her box of cracklin oat bran and her special k cookies, you didn't get this idea from me. K.
CrispyLeaves98
Well-Known Member
Alrighty so is the carb only running on choke for sure an intake problem? I just got a gasket gonna put it on but what do I do if it still only runs on choke?
CrispyLeaves98
Well-Known Member
I have no idea why but the hardware store had a gasket for the perfect size
Crispy, This might help ya in the future
Gasket Making 101
Howzit Everyone, $SAVE MONEY$ Gaskets made easy. Don't reach for the razor blade. Grab your 8oz alignment tool (ball peen hammer) and tap it out, Lightly tap gasket around the edges. As you tap out the bolt holes (or punch) put bolts in to help keep gasket aligned. The 1/32" rubber fiber sheet...
motoredbikes.com
